Garage Lumber Rack – Easy Cheap DIY Project



Here is a quick and simple medium duty lumber rack that I made out of 2×3′s and 1/2 plywood. This is a super easy project that can be useful to anyone from a beginner to the more seasoned builder.

This project used 6 – 2×3′s and 2 1/2 – 10″ strips of 1/2 plywood. Plywood was in the home depot 70% off cull bin (for around $4-5 per sheet) and was warped and cracked in many places… but still good enough for this project:) Not sure how many screws I used but lets say that a 1/3 to 1/2 a box would do it;) I used an assortment of what I had on hand though.

Please check out my other videos for more random homesteading style projects:) Thanks for watching!


Post time: 04-18-2017