Make your own custom necklace and earring stands for displays at craft shows, exhibits, photo props or your own home. This simple project uses readily available materials and tools. Here’s the materials/tools list.
• Balsa shapes – oval (2.8” x 4.3”), rectangle (3.5” x 4.5”)
• Doll head/knob – 1-1/4”
Paint brush or sponge brush
Sandpaper (I used 240 grit)
Wood or strong craft glue
Sealer (optional to add sheen and protect surface – I used Mod Podge)
Mod Podge or other decoupage medium
Applicator – paint brush or sponge brush
Scissors (optional if decoupaging)
Drill (optional if making earring stand) can be electric or hand with small drill bit just large enough to accommodate earring findings
For earring display I drilled holes down 3/4″, 1″ and 1-1/4″ from the top middle and in 1/2″, 5/8″ and 3/4″ in from each side. See my blog for a diagram.
Post time: 05-25-2017